Special Tools
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Assembly tool:T10065
- Wheel hub support:T10149
- Torque wrench:V.A.G 1331
- Torque wrench:V.A.G 1332
- Torque wrench:V.A.G 1576
- Engine-/transmission jack:V.A.G 1383 A with universal transmission support:V.A.G 1359/2
- Tensioning Strap:T10038
- Ring spanner insert AF 21:T40183
- Pneumatic/hydraulic foot pump :VAS 6179
- Spring tensioning system:VAS 6274
- Supplementary set:VAS 6274/10
- Hydraulic cylinder:VAS 6178
- Pneumatic/hydraulic foot pump :VAS 6179
- Assembly tool:T10205
- Assembly tool:T10263
- Assembly tool:T40033
- Assembly tool:T40185
- Assembly tool:3346
- Assembly tool:3301
- Grease cap puller:VW 637/2
- Fitting sleeve:3241/4
- Torque wrench:V.A.G 1410
- Thrust plate:VW 401
- Thrust plate:VW 402
- Punch:VW 408 A
- Punch:VW 411
- Shop press:V.A.G 1290 A
- Assembly tool:T40184
- Shock absorber set:T10001
- Punch:VW 412
- Assembly tool:T10230
- -3- Separating device:Kukko 15/3 with 17/3
- CV joint boot clamp tool:3340
- Punch:VW 409
- Support sleeve:VW 522
- Clamp:40 - 204 A
- CV joint boot clamp tool:V.A.G 1682