Upper Transverse Link: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dimension From Center Of Wheel To Lower Edge Of Wheel Housing

Courtesy of AUDI OF AMERICA, LLC

-- Determine dimension -a- from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on its wheels.

-- Place the vehicle on a hoist.

-- Remove wheels.

-- Remove subframe on vehicles with front-wheel drive (FWD). Refer To SUBFRAME WITH ATTACHMENTS .

-- Remove subframe on vehicles with all-wheel drive (AWD). Refer To SUBFRAME WITH ATTACHMENTS .

-- Mark the position of the eccentric bolt -2- the wheel bearing housing, for example using a felt-tip pen.

Fig 2: Connections -1- & -2- & Upper Transverse Link -3-

Courtesy of AUDI OF AMERICA, LLC

-- Separate connections -1- and -2-.

-- Remove upper transverse link -3-.