Fender Brace, Removing And Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Brace
-- Loosen the wheel housing liner in the area of the brace and press it to the side.
-- To remove, remove nuts -2- on the longitudinal member and nuts -6 - on fender.
- Nut
- 8 Nm NOTE:
The brace is secured on the right side with bolts tightened to 10 Nm.
- 8 Nm
- Longitudinal Member
- Fender
- Bumper Cover Bracket
- Nut
- 4 Nm