Coolant Fan, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Coolant Fan

Courtesy of AUDI OF AMERICA, LLC

-- Remove the fan shroud. Refer To RADIATOR, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- on the Coolant Fan -V7- (left).

-- Free up the wiring harness and remove the left coolant fan.

-- Remove the bolts -arrows- on the Coolant Fan 2 -V177- (right).

Fig 2: Identifying Bolts On Right Coolant Fan

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness.

-- Unclip the coolant fan control module -1- from the fan shroud and remove the fan with the control module.