LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1241 (Wiper/Washer Systems (Coupe)) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Washer Fluid Reservoir, Removing And Installing >> Washer Fluid Reservoir Filler Tube, Removing And Installing >> Removing

Washer Fluid Reservoir Filler Tube, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Alarm Horn, Removal
GWWA92-10115Courtesy of AUDI OF AMERICA, LLC

Vehicles Through 05/2008: 

-- Remove the seal -arrow- near the windshield wiper fluid reservoir filler tube.

-- Unclip the plenum chamber cover -3- and remove it.

NOTE:

Ignore Items -1 and 2-.

Vehicles From 06/2008: 

Fig 2: Identifying Plenum Chamber Cover
GWWA92-10166Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

Continuation For All Vehicles: 

Fig 3: Identifying Filler Neck With Filler Tube From Washer Fluid Reservoir And Opening In Body
GWWA92-10091Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -1- and tilt the windshield wiper fluid container filler tube slightly upward -arrow A-.

-- Remove the filler neck -2- with filler tube from the washer fluid reservoir and the body opening -arrow B-.