Washer Fluid Reservoir Filler Tube, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Filler Neck With Filler Tube To Washer Fluid Reservoir

Courtesy of AUDI OF AMERICA, LLC

Tightening Specification. Refer To OVERVIEW - WINDSHIELD WASHER SYSTEM .

Install In Reverse Order Of Removal. Note The Following:

-- Slide The Sealing Grommet -2- On The Filler Neck Tube -1- As Far As The Stop.

The Tab Must Lie In The Opening On The Filler Tube -Arrows-.

-- Slide The Filler Neck Into The Washer Fluid Reservoir.

NOTE:

Make Sure The O-Ring Is Not Crushed When Sliding It Into The Washer Fluid Reservoir.