LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1235 (Bumpers (Coupe)) >> 63 Bumpers >> Front Bumper >> Impact Absorber, Removing And Installing >> Impact Absorber, Removing And Installing, AUDI RS5 >> Removing

Impact Absorber, Removing And Installing, AUDI RS5: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

-- Disconnect the front parking aid sensor electrical wiring harness -1- -arrow- if applicable.

-- Guide the impact absorber -2- out of the brackets -A- and remove it.

scientia non olet · About LEMON Manuals