Impact Absorber, Removing And Installing, AUDI RS5: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

Impact Absorber Mount

Fig 1: Identifying Impact Absorber

Removing

-- Remove the license plate bracket. Refer to LICENSE PLATE BRACKET, REMOVING AND INSTALLING .

-- Remove the impact absorber. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, AUDI RS5 => Impact Absorber .

-- Remove the bolts -arrows- and the mount -1- .

Installing

Tightening specifications. Refer to OVERVIEW - RADIATOR GRILLE, AUDI RS5 .

Install in reverse order of removal. Note the following:

-- Install the impact absorber. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, AUDI RS5 => Impact Absorber .

-- Install the license plate bracket. Refer to LICENSE PLATE BRACKET, REMOVING AND INSTALLING .