Impact Member Mount, Removing And Installing For Vehicles Through My 2011: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Audi A5. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 , Audi RS 5. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .
-- Remove the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .
-- Remove the headlamp washer system spray nozzle. Refer to Headlamp Washer System .
-- Mark the installation position of the mount to the lock carrier for installation later.
-- Remove the bolts -arrows- .
-- Audi A5: Remove the bolt -1- .
-- Audi RS 5: Remove the nut -1- .
-- Tip the impact member mount -2- on the lock carrier out and remove it.