Bumper Cover, Adjusting
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- If the gap dimension is not even, position the wrench on the adjusting bolt -1- and adjust the gap dimension for the front bumper cover -2- .
-- Check the gap dimension again and repeat the adjustment if necessary.