LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1234 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Rear Lid >> Hinges, Removing And Installing >> Spring Engaging Points

Spring Engaging Points

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Spring Engaging Points
GWWA55-10282Courtesy of AUDI OF AMERICA, LLC
  1. Spring
    • Engaging:

      -- With the lid closed, engage the spring first on the hinge side and then on the body side.

      -- On the left side of the vehicle, the spring eyes must face down on the retaining pins, as shown in the magnified section of the illustration.

      -- Up on the right side.

    • Body engaging points:

      -- On the right side, engage the sprint at point -a-.

      -- On the left side, engage the spring at point -d- after installing the lid hinge end stop.

  2. Retaining Pin
    • Note the different directions for engaging the spring on the left and right.
    • The spring eye faces down on the left side and up on the right side.