Overview - Rear Lid Latch

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Lock, Removing And Installing

Courtesy of AUDI OF AMERICA, LLC

Lid Latch
- Loosen the upper bumper cover and push it aside.
- Disconnect the lid lock cable at the coupling.
- Disconnect the connector.
- Remove the bolts -1 and 2-.
  NOTE:
  To Adjust The Hood Height, Move The Lid Lock Up Or Down As Required.
Lock Carrier
Bolt
- 11 Nm
Clip
- Slide the clamp with the electrical wire onto the tab on the lock carrier.
Lid Lock Wire
Tab