Overview - Gas-Filled Strut
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Gas-Filled Strut
- To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.NOTE:
Ensure correct positioning during installation: the gas-filled strut tube must be attached on the body-side.
- To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.
- Hood
- Ball Pin
- 21 Nm