Operating Lever Cover, Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- >>A-Pillar<< Lower Trim
- Hood Release Lever Cover
- First disengage the cable from the coupling inside the engine compartment. Refer to CABLE COUPLING .
- Pry the clip out of the hood release lever.
- Remove the cover sideways from the operating lever.
- Operating Lever
- Clip
- Press in completely, it must engage.