LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1234 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Hood >> Hood Release Lever, Removing And Installing >> Hood Release Lever, Removing

Hood Release Lever, Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Hood Release Lever
GWWA55-10302Courtesy of AUDI OF AMERICA, LLC
  1. Release Cable
    • Clip the cable bracket into the mounting bracket as shown in the magnified section of the illustration.
  2. Hood Release Lever Bracket
    • The hood release lever cover is removed.
    • The trim for the >>lower A-pillar is removed<<.
    • Remove the screws -3- and disengage the cable -1-.
  3. Bolts
    • 2 Nm 
  4. Clip
  5. A-Pillar
scientia non olet · About LEMON Manuals