LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1234 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Hood >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

After Complete Removal Of The Gas-Filled Strut Ensure Correct Positioning During Installation: The Gas-Filled Strut Tube Must Be Attached On The Body-Side.

-- Press Gas-Filled Strut Onto Ball Stud And Engage.

scientia non olet · About LEMON Manuals