Inner Door Seal, Removing And Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Lower Door Seal
- Before removal, remove the sill panel trim and the lower A-pillar trim panel. Refer to PASSENGER COMPARTMENT TRIM .
- Loosen or unclip the rear side trim panel in the area of the door seal. Refer to PASSENGER COMPARTMENT TRIM
.
-- Remove the lower door seal from the body flange and under the upper door seal.
-- When installing the front and rear door seal, first slide it under the upper door seal and then press it onto the body flange.
- Upper Door Seal
- Loosen or unclip the rear side trim panel and B-pillar trim panel in the area of the door seal. Refer to PASSENGER COMPARTMENT TRIM .
- Remove the upper A-pillar. Refer to PASSENGER COMPARTMENT TRIM
.
-- Remove the upper door seal on the A-pillar and B-pillar, then pull it off the body flange.
- Sill Panel Cover
- Removed. Refer to PASSENGER COMPARTMENT TRIM .
- Headliner
- Pull downward around the upper door seal
- Upper B-Pillar
- Removed. Refer to B-PILLAR TRIM, REMOVING AND INSTALLING .