Catch, Adjusting
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The striker pin backing must be position with the pins -arrows- exactly in the hole.
The striker pins must be sheared off cleanly after sliding the striker pin.
-- Loosen the bolts -2-.
-- Slide the catch -1- until the door is flush with the body contours.
NOTE:
When adjusting the catch, move it only toward the center of the vehicle.
Do not adjust the door height using the catch because the door lock will be damaged.
-- The catch must align in door lock center for correct adjustment.
-- Tighten the bolts -2-.
- Tightening Specification. Refer to DOOR LOCK .