Lock Cylinder, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the door seal to the side and remove the protective film over the hole -arrow A-.
-- Remove the locking bolt -4- as far as the stop using a screwdriver -1-.
-- Press the lock cylinder retaining bracket -3- inward.
-- Remove the lock cylinder -2- from the mounting bracket -arrow B-.
NOTE:
If the lock cylinder cannot be pressed out, slide the key into it and remove it with the key turned slightly.