Bracket, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
-- Engage the operating cable -3- in the door lock operating lever -2-.
-- Insert the operating cable in the cable bracket -1- and rotate the lever -4- 90° -arrow-.
- The lever must engage audibly with the locking tab on the cable bracket.
-- Install the lock cylinder guide. Refer to LOCK CYLINDER GUIDE, REMOVING AND INSTALLING .
-- Install the door shell cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
-- Install the door trim panel. Refer to FRONT DOOR TRIM PANELS .
-- Install the exterior door handle. Refer to DOOR HANDLE, REMOVING AND INSTALLING .