Antenna Amplifier 2 -R111- / Antenna Amplifier 3 -R112-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove The C-Pillar Trim Panel, Refer To C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connector from the Antenna Amplifier 2 -R111-.
-- Remove the screws -arrows- and remove the Antenna Amplifier 2 -R111- -1- from the C-pillar -2-.