Right Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .

NOTE:

Replace Any Bolts That Were Tightened With An Additional Turn.

When Installing, Bring All Cable Ties Back To Same Positions.

-- Install The Electric Wires. Refer To The Appropriate Wiring Diagram(s).

-- Install The Generator. Refer to GENERATOR, REMOVING AND INSTALLING .