Engine, Removing, Vehicles With Automatic Transmission: Notes
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Pry Lever:80-200
- Used Oil Collection and Extraction Unit:SMN372500
- Step Ladder:VAS5085
- Engine Bung Set:VAS6122
- Scissor Lift Table:VAS6131B with Scissor Lift Table - Audi Set:VAS6131/10 , Scissor Lift Table - A8 Set :VAS6131/11 , Scissor Lift Table - Q7 Set:VAS6131/13 and Scissor Lift Table - Audi Set - Mounting Pin:VAS6131/10-2 quantity: 3
- Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6340
- Hose Clip Pliers:VAS6362
NOTE:
With Lock Carrier Installed, Engine Is Removed Downward Together With The Transmission And The Subframe.
Collect Escaping Coolant In A Clean Container For Disposal Or Reuse.
During Installation, Cable Ties Must Be Installed At The Same Location.