Sealing Flange Cover - Tightening Specifications
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Tighten the bolts -arrows- to 1.5 Nm.
Fuel filler tube ground connection
-- Make sure the filler tube threaded connections -1- and -2- are free of corrosion so the ground connection to the body is not affected.
WARNING:
Risk of explosion due to electrostatic charge.
- After installing, check electrical connection on fuel filler neck metal ring to an empty spot on the body using an Ohm meter.
- Specified value: approximately 0 Ω.