Suction Line, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Remove the Fuel Level Sensor 2 -G169-. Refer to Fuel Level Sensor 2 -G169-, REMOVING AND INSTALLING .

-- Carefully remove the Fuel Level Sensor 2 -G169- -3- with the suction line -1- from the fuel tank opening.

Fig 1: View Of Fuel Suction Line -1-, Connector -2- And Fuel Level Sensor 2 -G169- -3-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

When removing, do not bend the floater arm on the Fuel Level Sensor 2 -G169-.

-- Disconnect the connector -2- by pressing the release -arrow A-.

-- Press the bracket together with needle nose pliers -B arrows- and remove the suction line.