LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1230 (Fuel Supply (Coupe)) >> 20 Fuel Supply >> EVAP System >> Leak Detection Pump, Removing And Installing >> Removing

Leak Detection Pump, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying EVAP Canister Bolts And Electrical Connector -2-
GWWA20-10452Courtesy of AUDI OF AMERICA, LLC

-- Remove the Evaporative Emission (EVAP) canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .

-- Free up the electrical connector -2-.

-- Remove the bolts -3-.

-- Unclip the diagnosis pump -1- from the bracket on the EVAP canister.

scientia non olet · About LEMON Manuals