Fuel Tank Leak Detection Control Module With Integrated Fuel Tank Pressure Sensor, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Evaporative Emission (EVAP) canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
-- Loosen the hose clamps to remove the ventilation hoses -3-.
-- Remove the bolts -1-.
-- Remove the Fuel Tank Leak Detection Control Module -J909- with integrated Fuel Tank Pressure Sensor -G400- -2- from the EVAP canister -arrow-.