LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1230 (Fuel Supply (Coupe)) >> 20 Fuel Supply >> EVAP System >> Fuel Tank Leak Detection Control Module With Integrated Fuel Tank Pressure Sensor, Removing And Installing >> Installing

Fuel Tank Leak Detection Control Module With Integrated Fuel Tank Pressure Sensor, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the seal.

-- Install the EVAP canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .