EVAP Canister, Removing And Installing, Rest Of World Vehicles: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the left rear underbody panel. Refer to UNDERBODY TRIM PANEL .
-- Remove the breather line -1-. Refer to CONNECTOR COUPLINGS, SEPARATING .
-- Disconnect the breather line -3- to the fuel tank. Refer to CONNECTOR COUPLINGS, SEPARATING .
-- Disconnect the vent line -5- to the EVAP Canister Purge Regulator Valve 1 - N80- by pressing the release button.
-- Remove the bolts -2, 4 and 6- and remove the EVAP canister.