Version 1

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coupling

Courtesy of AUDI OF AMERICA, LLC

Right and left coupling with release buttons -arrows-.

Opening

Fig 2: Identifying Lever

Courtesy of AUDI OF AMERICA, LLC

It is necessary to counterhold the fuel separating point -1- inside the engine compartment.

-- Insert the Lever - Fuel Line:T10468 between the heat shield and the fuel line stop -arrow- -2- and counterhold it.

Continue for all separation points on the fuel system:

Fig 3: Identifying Coupling

Courtesy of AUDI OF AMERICA, LLC

-- Push the connector coupling -1- in direction of -arrow A-.

-- Press the release button and hold it down.

-- Disconnect the connector coupling -1- from the fuel line -2- in the direction of -arrow B-.

Follow the color coding when installing. Refer to CONNECTOR COUPLINGS, SEPARATING

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to make sure it is secure.