Fuel Tank With Attachments Assembly Overview: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- For Tightening Specifications, Refer To EXHAUST PIPES/MUFFLERS [FOR ENGINE(S) CALA] and EXHAUST PIPES/MUFFLERS [FOR TRANSMISSION(S) 0B6] [FOR ENGINE(S) CAUA] .
- Exhaust System Mounts
- Securing Strap
- Fuel Line
- From Fuel Filter To Engine
- Do Not Kink
- Clipped In At Fuel Tank
- To Disconnect, Press Release Button On Connection Piece
- Bolt
- 8 Nm
- Protective Plate
- For Fuel Delivery Connection
- Overflow Hose
- Engaged On Bumper Bracket
- Rubber Gasket
- Cap
- Turn Until It Engages Audibly
- Attached To Tank Flap Unit With Fastening Device
- Bolt
- For Securing Fuel Filler Neck
- For Discharging Electrostatic Charge Figure
- 20 Nm
- Fuel Tank
- Removing and installing, refer to FUEL TANK WITH ATTACHMENTS .
- Vent Line
- To EVAP Canister
- Do Not Kink
- To Disconnect, Press Release Button On Connection Piece
- Clipped In At Fuel Tank
- Fuel Tank Heat Shield
- Nut
- 2 Nm
- Nut
- 2 Nm
- Carrier Plate
- Fuel Tank Heat Shield
- Nut
- 2 Nm
- Bolt
- 20 Nm
- Nut
- 2 Nm
- Spreader Clip