Left Combination Valve, Removing And Installing, Without Vacuum Control: Removing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover in direction of -arrows-.
-- Remove the plenum chamber bulkhead. Refer to LOCK CARRIER .
-- Free up the wiring harness and push it to the side.
NOTE:
Ignore item -1-.
To provide a better illustration, component location is shown from behind with engine removed.
-- Remove the secondary air hose -3- by pressing the release buttons.
-- Remove the bolts -2- and remove the left Secondary Air Injection (AIR) combination valve.