Vacuum System, Checking: Procedure
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
-- Check all vacuum lines in the vacuum system for:
- Cracks
- Damage caused by animals
- Crimps
- Leaks
-- Check the vacuum lines leading both to and from the solenoid valve to the respective component.
-- If there is a fault stored in the DTC memory, check the vacuum lines for the named component, but also check all the vacuum lines.
-- If using the Hand Vacuum Pump:VAS6213 does not produce any pressure or if the pressure drops again right away, then check the hand vacuum pump and the connection hoses for leaks.