LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1215 (General, Technical Data (HVAC) (Coupe)) >> 00 General, Technical Data >> Repair Information >> Contact Corrosion

Contact Corrosion

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Contact Corrosion Can Occur If Inappropriate Fasteners (Bolts, Nuts, Washers, Rivets, Plugs, Grommets, Adhesives Etc.) Are Used.

For This Reason, The Manufacturer Only Installs Fasteners With A Special Surface Coating. Also, Rubber And Plastic Parts And Adhesive Consist Of Materials That Do Not Conduct Electricity. These Parts, Which Have Been Tested And Are Aluminum Compatible, Are Also Available As Replacement Parts.

NOTE:
  • Always Install New Parts If There Is Any Doubt As To Whether Parts Can Be Reused.
  • Original equipment replacement parts are recommended. They have been tested and are compatible with aluminum.
  • Audi accessories are recommended.
  • Damage due to contact corrosion is not covered by warranty.