Upper Control Arm: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wheel.
-- Remove the bolt -1-.
-- Remove booth joint pins in the upper control arm -2- from the wheel bearing housing.
The slits in the wheel bearing housing must not be widened using a chisel or similar tool!
-- Remove the nuts -3- and -6-.
-- Remove the bolts -4- and -5- and remove the upper control arm upward.