Bearing, Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove guide control arm. Refer to GUIDE LINK .
-- Mark the installation depth -arrow- on the bearing -1-.
Use a waterproof felt-tip pen.
-- Install the special tools as shown in the illustration.
-- Press bearing -1- out of guide link -2-.