Diagonal Brace, Cabriolet: Installing: Notes
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
The stamped edge on the diagonal brace near the bolt holes must be on the bolt head side.
Pay attention to the tightening sequence and the pre-tightening specification.