Suspension Strut And Mounting Bracket: Overview
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- 50 Nm
- Always replace if removed.
- Shock Absorber Mounting
- Washer
- Mounting Bracket
- Upper Spring Support
- Coil Spring
- Removing, refer to Figure
- Installing, refer to Figure
- Note different types of suspension versions, see vehicle data plate. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATIONS .
- Allocation, refer to Parts Information..
- Additional Spring
- Protective Sleeve
- Protective Cap
- Lower Spring Support
- Lower Spring Plate
- Shock Absorbers
- Replacing, refer to Figure.
- Note different types of suspension versions, see vehicle data plate. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATIONS .
- Always release gas and drain malfunctioning shock absorbers before disposal.
- Allocation, refer to Parts Information..
The shock absorber combination installed in the vehicle is indicated by the corresponding PR number on the vehicle data plate.