Outer CV Joint, Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hitting Copper Or Brass Mandrel Onto Inner Ring Of Constant Velocity Joint

Courtesy of AUDI OF AMERICA, LLC

-- Secure the drive axle with protective covers in a vise clamp.

-- Open both clamping sleeves and remove protective joint boot from outer joint.

-- Strike a copper or brass drift -A- on CV joint inner race with a hammer.

-- Remove joint and protective joint boot.