LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1207 (Wheels, Tires, Wheel Alignment (Wheel And Tire General Information) (Coupe)) >> 44 Wheels, Tires, Wheel Alignment >> Vehicles With Break-Down Kit >> Tires, Mounting

Tires, Mounting

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

If tire sealant was used, then the wheel electronics on that particular wheel must be replaced.

-- After using tire sealing liquid, wheel electronics must be replaced, since there is the possibility of incorrect measurements due to liquid deposits on pressure sensor.

-- Insert a new tire valve.

-- Remove the valve insert.

-- Inflate tire to approximately 3 to 4 bar (43.5 to 58 psi), tire bead must audibly slide over rim hump.

-- Install valve insert.

-- Correct inflation pressure to the specified pressure.

-- Balance wheel.

scientia non olet · About LEMON Manuals