Wheel Electronics System (Tire Pressure Monitoring System), BERU
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1410:VAG1410 and Torque Wrench 1410 Insert - Accessory Kit:VAG1410/1
WARNING:
If tire sealant was used, then the wheel electronics on that particular wheel must be replaced.
WARNING:
Damaged wheel electronics must be replaced.
-- Push the wheel electronics -1- into the bed.
-- Install on the valve from the back with a microencapsulated screw
NOTE:
Replace the microencapsulated screw.
Tighten the microencapsulated screw to 4 Nm on all models.
Tightening specification for all models: 4 Nm