Sill Panel Trim, Removing And Installing, AUDI RS5: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Noise Insulation -1-, Clips -2-

-- Remove the side trim panel. Refer to Passenger Compartment Trim .

-- Remove the noise insulation -1- .

-- Loosen the clips -2- in order to carefully press the retaining clips together in direction of -arrows- .

-- Carefully loosen bonding -1 and 2- on the side panel.

Fig 2: Identifying Bonding -1- And -2- On Side Panel

-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, AUDI RS5 .

Fig 3: Identifying Bolts -1 To 3-

-- Remove the bolt -2- and both washers.

-- Remove the bolts -1 and 3- .

-- Remove the bolts -2- .

Fig 4: Identifying Bolts -2- And Sill Panel Trim -1-

-- Open the door.

-- With a second technician, slide in direction of -arrows- the sill panel trim -1- forward and remove it.

Unclip the clips for the sill panel trim.