Power Steering Pump, Removing And Installing, 4-Cylinder Diesel Engine, Vehicles Without Dynamic Steering: Notes
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Hose Clamps - Up To 25 mm:3094
- Wrench - Pin Type:3212
- Hose Clip Pliers:VAG1275A
- Torque Wrench 1331 5-50 Nm :VAG1331
- Used Oil Collection and Extraction Unit:SMN372500
- Engine Bung Set:VAS6122
- Shop Crane - Drip Tray:VAS6208
General Information
The power steering pump is not designed to be serviced. If there are customer complaints, the cause must be determined using a pressure and leak test. If there is a malfunction, replace the power steering pump.
- If power steering fluid is low in reservoir, check steering system for leaks.
- If there are leaks in the area of the line connections, the lines/connections must first be inspected for leaks, tightened as necessary and wiped dry.
- The power steering pump is delivered without oil. Before installing, fill pump with Hydraulic Fluid and turn pump by hand. Otherwise, the power steering pump may be noisy when operating or may even be damaged.