Hydraulic Fluid Cooler, Removing And Installing, RS Models: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following . Refer to OVERVIEW - HYDRAULIC POWER STEERING, 8-CYLINDER FSI HYDRAULIC FLUID COOLER TO THE CONDENSER - RS MODELS .

-- The markings -2- on the hose line must point upward in the >>12 O'clock<< position.

Fig 1: Identifying Markings -2- On Hose Line Must Point Upward In 12 O'clock Position

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Counterhold the pipes when connecting the lines.

-- Top off Hydraulic Oil.

-- Clean any oiled places.

-- Bleed the steering. Refer to STEERING, BLEEDING AFTER REPLACING .

-- Check power steering fluid level. Refer to POWER STEERING FLUID LEVEL, CHECKING .

-- Check all open line connections for leaks. Refer to STEERING, CHECKING FOR LEAKS .

-- Install The Front Bumper Cover. Refer To OVERVIEW - BUMPER COVER, AUDI RS5 /BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

NOTE:

Secure All Hose Connections With Hose Clamps Appropriate To The Model. Refer To The Parts Information..