Wiring Harness Repair Set - Hot Air Blower :Vas1978/14A
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When Heat-Shrinking Crimp Connections, Be Careful Not To Damage Any Other Wiring, Plastic Parts Or Insulating Material With The Hot Nozzle Of The Hot Air Gun.
Always Observe Operating Instructions Of Heat Gun.
The :VAS1978/14A Is Used Together With The :VAS1978/15A To Heat-Shrink The Crimp Connectors. After Crimping, Crimp Connections Must Be Heat-Shrunk Using Hot Air Gun To Prevent Moisture Penetration.
The :VAS1978/14A Is A Component Of The :VAS1978B And Its Previous Versions.
-- Insert The :VAS1978/15A on the :VAS1978/14A .
CAUTION:
Risk Of Damaging Surrounding Components.
- When Heat-Shrinking Crimp Connections, Be Careful Not To Damage Any Other Wiring, Plastic Parts Or Insulating Material With The Hot Nozzle Of The Hot Air Blower.
- Always Observe Operating Instructions Of Heat Gun.
-- Heat Crimp Connection Using The Hot Air Blower Lengthwise From Center Outward Until It Is Sealed Completely And Adhesive Comes Out The Ends.
- This Is How The Completed Repair Location With Individual Crimp Connector Should Appear.