Determine Position Of The Error: Procedure
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
It Is Very Difficult To Find The Exact Location Of The Problem. Replace The Damaged Fiber-Optic Cable And Lay A New Wire Parallel To The Defective Fiber-Optic Cable.
NOTE:
Via The "Guided Fault Finding" It Can Be Determines Which Component Of The Fiber-Optic Cable Is Damaged.
A Fiber-Optic Cable That Needs Repair Is Represented By A "Yellow" Color.
-- Perform In The "Off-Board Diagnostic Information System Service" The "Ring Break Diagnosis" Function In The Vehicle Diagnostic Tester.
-- Remove The Affected Components.
-- Disconnect The Connector From The Components.
-- Assemble The Fiber-Optic Cable: