LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1201 (Wires (Coupe)) >> 97 Wires >> Wiring Harness And Connector Repairs >> Fiber-Optic Cables, Repairing >> Determine Position Of The Error >> Notes

Determine Position Of The Error: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

CAUTION:

Do Not Bend The Fiber-Optic Cable Too Much. The Bending Radius Must Be No Less Than 25 Mm.

Fiber Optic Cables Must Not Be Routed Over Sharp Edges.

The Fiber-Optic Cable Must Not Be Dirty Or Touched With Bare Fingers.

Fiber Optic Cables May Not Be Heated.

It Is Not Permitted To Twist Together 2 Fiber Optic Cables Or One Fiber Optic Cable With A Copper Wire.

Protect The Connector And The Connection Box From Dust. Place The Cap On The Trunk.