LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1201 (Wires (Coupe)) >> 97 Wires >> Wiring Harness And Connector Repairs >> Antenna Wires, Repairing >> Replacing A Complete Antenna Wire >> Notes

Replacing A Complete Antenna Wire: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

A Repair Procedure Has Been Developed For Replacing Antenna Wires. Instead Of A Complete Antenna Wire, Connecting Wires Of Different Lengths And Various Adapter Leads Are Now Available As Replacement Parts.

NOTE:

Do not repair antenna wires. Replace them using connector and adapter wires available as original replacement parts.

These original replacement parts are suitable for all antenna wires and wire cross sections that need to be replaced.

The wires are now to be used for all Audi models for all the antenna wire cross sections fitted.

All adapter leads and connecting wires are suitable for various transmission and reception signals.

The repair concept can also be used as a testing or retrofitting solution.