LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1200 (Wiring (Coupe)) >> 97 Wiring >> Relay Panels, Fuse Panels And E-Boxes >> Relay And Fuse Panel Behind Instrument Panel On Driver Side, Removing And Installing >> 3-Pin Relay/Fuse Panel, Removing And Installing >> Removing

3-Pin Relay/Fuse Panel, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying 3 Pin Relay/Fuse Panel Components
GWWA97-10477Courtesy of AUDI OF AMERICA, LLC

-- Turn Off The Ignition And Remove The Key.

-- Remove The Driver Side Instrument Panel Cover. Refer To DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Disengage The 3-Pin Relay/Fuse Panel By Pressing The Retaining Springs In The Direction Of The -Arrow- And Remove The Relay/Fuse Panel -1-.

-- Unclip The Fuse Panel On The Relay/Relay Panel.

-- Remove The Relay And Control Modules.

Fig 2: Identifying Retaining Clips
GWWA97-10472Courtesy of AUDI OF AMERICA, LLC

-- Release The Clips -Arrows- And Press The Relay Panel -2- Back And Out Of The Bracket -1-.

NOTE:

The exact assignment of the 3-pin relay/fuse panel can be found in the applicable wiring diagram. Refer to theAppropriate Wiring Diagram(s) .

scientia non olet · About LEMON Manuals