LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1200 (Wiring (Coupe)) >> 97 Wiring >> Relay Panels, Fuse Panels And E-Boxes >> E-Box, Removing And Installing >> Suppressor -C24-, Removing And Installing >> Removing

Suppressor -C24-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove fuse panel B inside the engine compartment E-box. Refer to FUSE PANEL B -SB- IN ENGINE COMPARTMENT E-BOX, REMOVING AND INSTALLING .

NOTE:

The Connectors Do Not Need To Be Disconnected.

-- Cut The Cable Tie -2-.

Fig 1: Identifying Suppressor Component -3-
GWWA97-10470Courtesy of AUDI OF AMERICA, LLC

-- Disconnect The Connector -1-.

-- Remove The Suppressor -C24- -Item 3-.

scientia non olet · About LEMON Manuals